EPSON ESC/POS COMMANDS
RTP-3280 Thermal Receipt Printer 17
Table 2-1 : Print Density
3.6Printer Status Report
The printer can generate a status report to show the current system configuration.
The report includes the following:
Supported paper width
Printing speed
RS-232 configuration such as Baud rate, parity check, data bits, and flow
control scheme
Supported emulation language
Print density
Receive error handling method
Printing the Status Report
Before printing the status report, make sure that the printer is turned off and the
cover is closed.
To print the status report, press and hold the FEED button and turn on the printer.
The printer prints the current status. After printing, the printer goes to standby mode.
Print Density SW 5 SW 6
1 (Light) ON ON
2 (Normal) OFF OFF
3 (Middle) ON OFF
4 (Dark) OFF ON
To Next Page
Loading...
