2
Declaration
Copyright
S
henzhen Appotronics Corporation Ltd. All rights reserved. No part of this
document may be reproduced, transmit
t
ed,
t
ranslated or stored in a retrieval
system or translated into any text or computer language in any form or by any
means, including electronic, mechanical, magnetic, optical, chemical, handwritten
or otherwise, without the prior written permission of Shenzhen Appotronics
Corporation Ltd.
All trademarks and registered trademarks are the property of their owners.
Disclaimer
Shenzhen Appotronics Corporation Ltd. does not make any express or implied
representations or warranties with respect to any of the contents of this manual,
and does not provide any warranties with respect to merchantability or tness for
a particular purpose. In addition, Shenzhen Appotronics Corporation Ltd. reserves
the right to revise this publication and to modify the contents of this document at
any time without notice to anyone.
Warranty
Under normal use and storage conditions, Shenzhen Appotronics Corporation
Ltd. provides warranty on any materials and process defects of this product. Proof
of purchase date must be provided when you require the warranty service. If this
product is found to be defective during the warranty period, the sole obligation of
Shenzhen Appotronics Corporation Ltd. and the exclusive remedy are to replace
any defective parts (including service charge). When you find the product you
purchase is defective, immediately notify the dealer to obtain the warranty service.
IMPORTANT: If the customer fails to use this product in accordance with the
written instructions, the above warranty will not apply. Ensure that the ambient
humidity is between 10% and 90% and the ambient temperature is between 0°C
and 40°C. Avoid using this projector in a dusty environment.
For additional information, please visit www.appotronics.com.
Important：Si le client n'utilise pas le produit conformément aux instructions
écrites, la garantie ci - dessus ne s'appliquera pas. En particulier, l'humidité
ambiante doit être comprise entre 10 et 90% et la température entre 0 et 40 ºC.
N'utilisez pas le projecteur dans un environnement poussiéreux.
To Next Page
Loading...
