47
Projector Maintenance
Maintenance
You need to regularly maintain the projector and clean the lens.
You can power on the projector only after the surface water is dried if you clean the lens or enclosure.
Do not disassemble any parts of the projector. To replace the parts, please contact the dealer.
Cleaning the lens
You can clean the lens when you find that the lens surface is stained or dusty.
Use a compressed air tank to remove dust.
If there is dust or stain, gently wipe the lens surface using the lens paper or damp cloth with some
cleaning agent.
Cleaning the projector enclosure
To remove dirt or dust, wipe the enclosure with a soft, lint-free cloth.
To remove strong dirt or spots, wet the soft cloth using water and neutral pH detergent, and then wipe the
enclosure.
Storing the projector
If you need to store the projector for a long period of time, follow the instructions below:
Ensure that the temperature and humidity of the storage area are within the recommended range for the
projector.
Retract the adjustment feet.
Remove the battery from the remote control.
Use the projector's original packaging or equivalent material to package the projector.
Transporting the projector
It is recommended to use the original packaging or equivalent material when transporting the projector.
- Do not rub the lens with abrasive materials.
-
Do not use wax, alcohol, benzene, thinner, or other chemical cleaners because these substances can
damage the enclosure.
Caution
Caution
Nettoyage du boîtier du projecteur
Pour enlever la saleté ou la poussière, essuyez le boîtier avec un chiffon doux et non pelucheux.
Pour enlever la saleté ou les taches fortes, humidifiez le chiffon doux avec de l'eau et un nettoyant à pH neutre,
puis essuyez le boîtier.
To Next Page
Loading...
