aptos MAC 800R - Decommissions; Decommissioning and Storage; Disposal Guidelines; Technical Data

To Next Page

To Previous Page

7. Decommissions

7.1 Decommissions

Disconnect the inverter from DC input and AC output. Remove all connection cable from

the Microinverter. Remove the Microinverter from the frame.

Please pack the Microinverter with the original packaging, or use a carton box that can afford 5kg

weight and can be fully closed if the original packaging is no longer available.

7.2 Storage and Transportation

Aptos packages and protects individual components using suitable means to make the transport and

subsequent handling easier. Transportation of the equipment, especially by road, must be carried out

by suitable ways for protecting the components (in particular, the electronic components) from

violent shocks, humidity, vibration, etc. Please dispose of the packaging elements in appropriate

ways to avoid unforeseen injury.

It is the customer’s responsibility to examine the condition of the components transported. Once

receiving the Microinverter, it is necessary to check the container for any external damage and verify

receipt of all items. Call the delivering carrier immediately if damage or shortage is detected. If

inspection reveals damage to the inverter, contact the supplier or authorized distributor for a

repair/return determination and instructions regarding the process.

The microinverter storage temperature is -40-85C.

7.3 Disposal

- If the equipment is not used immediately or is stored for long periods, check that it is correctly

packed. The equipment must be stored in well-ventilated indoor areas that do not have

potential characteristics that might damage the components of the equipment.

- Take a complete inspection when restarting after a long time or prolonged stop.

- Dispose of all unused material properly in accordance with local environmental regulations.

8. Technical Data

Warning

 Be sure to verify the following before installing Aptos Microinverter System.

Verify that the voltage and current specifications of the PV module must match those of the

microinverter.

Other manuals for aptos MAC 800R