aptos MAC 800R - Product Function; Work Mode; Installation Guide; Accessories and Preparation

9
4. Product Function
4.1 Work Mode
Normal: Under this mode, Microinverter is operating normally and will convert DC power into AC
power to support the house loads and feed into the Public Grid
Zero Export Control: Under this mode Microinverter’s generation is limit base on the current house
loads, there will be no extra power feed in to the Public Grid.
Standby: There are several circumstance that Microinverter will stay in Standby mode:
- The current condition is contradicted with Microinverter operating requirement.
- No house loads or the Export control value has been set as “0” on the DTU under the Zero Export
Control mode.
5. Installation Guide
5.1 Accessories
*Note: All accessories above are not included in the package and need to be purchased separately. Please contact
our sales representative for the pricing. (M8 screws need to be prepared by installer-self.)
Object
Description
A
AC End Cable (Female), 2m 12AWG Cable
B
M8*25 Screws
C
DC Extension Cable, 1m
D
AC Female End Cap, IP67
© 2021 Aptos Solar Technology, LLC. All rights reserved.