Aputure Electro Storm CS15 - Control System; Dimming Curve

õîĐąõç_ĬĉĐÁì
çĕÁĐõõĐÓ
DDõ½Á
[D
ĐÓÁąîÁĐ
 If you turn on High-Speed Mode:
(1) The intensity of the lamp is set to a minimum 0f 20%. No level below 20% is allowed while using High-Speed
Mode.
(2) FX Modes cannot be utilized in High-Speed Mode.
(3) Controlling the light with DMX data is not allowed in High-Speed mode. If the unit detect DMX data, then
High-Speed Mode is automatically disabled.
2.2.3 Dimming Curve
The following Dimming Curves are available: Linear, Logarithmic, S-Curve and Exponential.
2.2.4 Control System
Electro Storm CS15 is equipped with four remote control modes: DMX, Sidus BT, CRMX and Ethernet
(Art-Net/sACN). Only one mode can be VTFEBUBUJNF.
ÖììÖîÍĕąĥÁ
_瀆·ĕąĥÁ
>ÖîÁ§ą
īĂ
>õÍ
