Aputure Electro Storm CS15 - Ethernet

õîĐąõç_ĬĉĐÁì
DDõ½Á
ĐÓÁąîÁĐ
çĕÁĐõõĐÓ
[D
ĐÓÁąîÁĐ

ąĐ瀆EÁĐ煁ĉE
/X_ÁĐĐÖîÍĉ
_ЧĐÁ潽 ĕĐõ_ÁĐ/X
/X½½ąÁĉĉ
溡 溢 溤溩
_ĕ¶îÁĐD§ĉä 溢溥溥潻溢溥溥潻溢溥溥潻溡
'§ĐÁĦ§Ĭ 溡 溢溥溥 溡溠溤
/X_ÁĐĐÖîÍĉ
D潽溠溠溡
XąõÌÖçÁ溡澱溡溡,
f煁['溨¶ÖĐ潻
EÁīĐ½½澱溠溡溢
Signal intensitya.
b.
c.
d.
Receiving CRMX data
Received CRMX, but no DMX data
-JOLFECVUOP59JTQSFTFOU
(1) a. Auto Set IP: The fixture will automatically receive an IP address from the DHCP server. In Auto
Set IP mode, you cannot edit the IP address, subnet mask and gateway;
2.2.4.4 Ethernet
You can set IP and control protocol (Art-Net/sACN) here.
D§îĕ§ç_ÁĐ/X
ĕĐõ_ÁĐ/X
_ЧĐÁ
