6.6 Hydraulic system (HG)
CAUTION: The hydraulic system is under high pressure!
If the connections are interchanged, there will be an inverse function and/or certain
destruction of the hydraulic motor! Danger of accident!
• When connecting hydraulic motors, the specified connection of the hydraulic hoses
must be observed!
• When connecting the hydraulic hoses to the tractor hydraulic system, make sure that
the hydraulic system on the tractor and implement side is unpressurised!
For hydraulic function connections between the tractor and the implement, coupling
sleeves and connectors should be marked to rule out operating errors!
• Inspect the hydraulic hose lines at regular intervals and replace in case of damage or
wear! The replacement lines must comply with the technical requirements of the
implement manufacturer!
• Due to the risk of injury, use suitable tools when searching for leaks!
• Liquids escaping under high pressure (hydraulic oil) can penetrate skin and cause
serious injuries! Consult a doctor immediately in case of injury! (Risk of infection!)
NOTE: Before working on the hydraulic system, park the implement, depressurize the
system and switch off the motor!
To Next Page
Loading...
Need help?
General
