To Next Page

To Previous Page

Quality for Professionals

7.2 Dismounting (changing) the meter roll

When changing the meter roll, observe the following:

• Refer to the seeding table and select the desired meter roll with the corresponding

spread rate.

• Empty the hopper completely beforehand.

• Unscrew the locking nuts from the side

cover plate for the meter roll.

• Remove the entire meter roll along with

the side cover plate.

Fig.: 21

Fig.: 22

Fig.: 20

Questions and Answers:

Need help?

Do you have a question about the APV PS 800 M1 and is the answer not in the manual?

APV PS 800 M1 Specifications

General