• It is forbidden to stand in the working area of the implement!
• Do not stand near rotating and swivelling parts of the implement!
• Hydraulic folding frames may only be actuated when nobody is standing in the
swivelling range.
• There are pinch and shear points on externally powered (e.g. hydraulic) parts!
• On implements with manual folding, always ensure that the implement is stable!
• For implements that are driven rapidly with soil-driven tools: Danger after lifting due
to the still rotating centrifugal mass! Only approach the implement when it has come
to a standstill!
• Before exiting the tractor, lower the implement onto the ground, switch off the motor
and remove the ignition key!
• Standing between the tractor and the implement is forbidden unless the vehicle is
secured against rolling away using the parking brake and/or with wheel chocks!
• Folded frames and lifting devices must be locked in transport position!
• Packer catch arms must be swivelled in and locked before road transport!
• Lock the track markers in transport position!
• When filling the hopper with slug pellets or similar toxic agents, only fill as much as
is needed in the near future. Protective clothing, safety gloves, and face and eye
protection must be worn during the filling procedure.
• Observe the warning information provided by the manufacturer on the packaging.
The seed grains used in your spreader can be toxic!
• Always keep hands, clothing etc. away from rotating parts!
• Keep your distance when the implement is switched on!
• Never look into the spreading cone!
• Product remains should be returned to the original packaging. Residues must not be
released into the environment.
• Authorised crop protection products are not known to have negative effects on the
materials of the implement.
• Maintenance, repair, and cleaning work as well as the elimination of malfunctions
should always be performed when the drive is switched off and the motor is at a
standstill!
• When mounting the spreading device, the operator must connect it to the tractor or
vehicle with a metal connection and if necessary, a grounding cable.
• Never look into the radar sensor!
• The operating manual calls for the use of CE-marked exchangeable universal joint
shafts as well as their covers!
• Some parts have stickers warning about high temperatures. When working on these
parts when they are hot, safety gloves must be worn. Dust deposits on the hydraulic
motor must be prevented. Clean.
To Next Page
Loading...
Need help?
General
