To Next PageTo Next Page
Need help?Do you have a question about the Aqua Computer QUADRO and is the answer not in the manual?
General| Type | Fan Controller |
|---|---|
| Channels | 4 |
| Voltage | 12V |
| Fan Control | PWM |
| Temperature Sensors | 4 |
| RGB Output | 4 |
| Interface | USB 2.0 |
| Software | Aquasuite |
| Power Input | SATA |
| Max Power per Channel | 25 Watts |
| Total Power | 100 Watts |
Provides a comprehensive overview of all connectors on the QUADRO device and their functions.
Details on connecting the PSU to the QUADRO controller, including pin assignments.
Information on connecting PWM fans and processing their speed signals.
Instructions for USB communication with a PC, including motherboard header connection.
Details on connecting the QUADRO to other Aqua Computer devices via the aquabus interface.
Information on connecting optional flow sensors and their pin assignments.
Details on connecting up to four temperature sensors and compatible sensor types.
Information on connecting addressable LEDs (RGBpx) and compatible products.
Instructions for downloading and installing the aquasuite software from the official website.
Overview of the aquasuite program window layout and basic navigation.
Steps to create new overview pages and unlock existing ones for editing.
Configuration and calibration of the four hardware temperature sensor inputs.
Configuration and calibration of the hardware flow sensor input.
Using software sensors to transmit data from PC components and third-party software.
Using controller curves to automatically adjust fan speed based on temperature points.
Adding and configuring new LED controllers for RGBpx effects.
Modifying settings and effects for already configured LED controllers.
Adjusting LED assignments and priorities for multiple controllers.
Updating the firmware of the QUADRO device using the aquasuite software.
