To Next PageTo Next Page
Need help?Do you have a question about the Aqua Simpool pH and is the answer not in the manual?
Critical safety instructions and precautions to follow before and during operation.
References to General Standards and European Directives applicable to the pump.
Details electrical features, performance specifications, flow rate, and backpressure.
Essential rules for correct pump installation concerning location and environment.
Lists all items included in the installation kit for correct setup.
Covers wall mounting, probe-holder, and electrode installation steps.
Instructions for connecting the pump to the electrical power supply.
Details on connecting the suction and delivery tubes for proper operation.
Overview of the pump's user interface, buttons, and LED indicators.
Explains the User Menu for setting main dosing parameters.
Details on accessing and navigating the Programming Menu.
Steps to quickly set up and start using the pump.
Procedure to select the display language for the pump interface.
Instructions for setting the pH setpoint and choosing the operating mode.
Step-by-step guide for calibrating the pH probe for accurate readings.
Options for setting manual temperature or automatic reading via PT100 probe.
How to view and reset pump operation statistics.
Procedure to calibrate the pump's dosing accuracy.
Guide to restore the pump to its factory default settings.
Configuration options for password, alarms, and general settings.
Details on the maintenance alarm, its activation time, and reset procedure.
How the pump signals a low level condition and its response.
Notification when the pump is left in the OFF position for an extended period.
Alarm activated when pH does not vary during a set dosing time.
Alarm triggered when pH goes below 5.00 or above 9.00.
Alarm triggered when pH goes below 6.00 or above 8.00.
Alarm activated when temperature is set to 'Aut' but PT100 probe is not connected.
Systematic and accurate procedures for maintaining the pump in optimal condition.
Recommended checks and cleaning for foot strainer, tubes, and valves.
General| Brand | Aqua |
|---|---|
| Model | Simpool pH |
| Category | Swimming Pool Pump |
| Language | English |
