TECHNOPOOL
Dosing systems for swimming pools ENGLISH
ADSP7000570 rev. 2.0 06/08/2021 10/37
3.1 USER MENU
The User Menu is used to verify the status of pumps and solenoid valve and also allows to prime the pumps.
Default screen shows the reading of the pH and Rx or Cl or HP and the temperature.
(redox in mV is displayed on Time/pH/Rx and pH/RxTechnopool3).
(the chlorine in ppm is only displayed on the Technopool3 pH/ClJ).
(the hydrogen peroxide in ppm is only displayed on the Technopool3 pH/HP).
Shows the status and the alarm of the pumps and solenoid valve.
(P2 and EV are not displayed on Time/pH Technopool3).
(P1 is not displayed on pH/Rx or pH/ClJ or pH/HP Technopool3).
Displays the status of P1 pump (it is not displayed on pH/Rx, pH/ClJ and pH/HP Technopool3).
Displays the status of pH pump.
Displays the status of P2/Rx/Cl/HPpump (it is not displayed on Time/pH Technopool3).
Displays the status of the solenoid valve (it is not displayed on Time/pH Technopool3).