TECHNOPOOL
Dosing systems for swimming pools ENGLISH
ADSP7000570 rev. 2.0 06/08/2021 12/37
3.2 INSTALLER MENU
The installer menu is used to program Technopool system.
To access this menu, press key Enter for 3 seconds; password request will be displayed:
3.2.1 Password insertion
Press keys ▼▲ to set the value; to pass to the next digit press key Enter; to confirm press
Enter for 3 seconds.
The default password is 0000.
Once the password is confirmed, the installer menu will be displayed.
Language
Set the language of the system.
Date of the latest modif.
Indicates the date of the latest modification carried out by the system.
pH calibration
Activates the procedure for the calibration of the pH electrode.
Rx calibration (is displayed on Time/pH/Rx and pH/Rx Technopool3)
Activates the procedure for the calibration of the redox electrode.
CI Calibration (only displayed on the pH/ClJ Technopool3)
Activates the procedure for the calibration of the chlorine electrode.
HP Calibration (only displayed on the pH/HP Technopool3)
Activates the procedure for the calibration of the hydrogen peroxide electrode.
Set Point/Timer
Programs the operations of the three peristaltic pumps and control relays of the solenoid
valve.
Def. Par. Rest.
Restores default parameters.
Settings
Set the system.
Temperature
Set the system temperature management.
Alarms
Management of all the system alarms is configured.
Initial menu
Return to the user menu.
To Next Page
Loading...
