Aqua Technopool pH-Rx - APPENDIX 1 - Default Parameters

TECHNOPOOL
Dosing systems for swimming pools ENGLISH
ADSP7000570 rev. 2.0 06/08/2021 29/37
11.0 APPENDIX 1 – Default parameters
Parameter
Default value
Language
English
First Product Quantity
175 ml
First Product Quantity at the maximum temperature
400 ml
First Product Maximum Temperature
35 ˚C
First Product Frequency
1 day
First Product Hour
h 13.00
Second Product Quantity
0 ml
Second Product Quantity at the maximum temperature
0 ml
Second Product maximum temperature
28 ˚C
Second Product Frequency
1 day
Second Product Hour
Auto
Set Point pH
7,4
pH Work Mode
Acid
Proportional Band pH
1
Set Point Rx
650 mV
Proportional Band Rx
50 mV
Relay Mode
Cyclical
Relay On
0 s
Relay On at the maximum temperature
0 s
Relay Off
0 s
Relay Off at the maximum temperature
0 s
Maximum Temperature for Relay Timing
28 ˚C
Stabilisation Time
30 s
Stabilisation after Alarm
No
Password
“0000”
User name
“ “
Contact assist.
“ +390522695805 “
Out 24V Alarm (alarm repetition)
Closed with Alarm
Temperature Mode
PT100
Manual Temperature
25 ˚C
Offset PT100
0 ˚C
Dosing Control (V1)
On
Flow Control
Off
pH dosing Alarm
Off
Rx dosing Alarm
Off
CI/HP dosing Alarm
Off
Buzzer (alarm repetition)
Off
System kind
Technopool TpH
Pump 1 flow
1.4 l/h
Pump 2 flow
1.4 l/h
Pump 3 flow
1.4 l/h
Pump 1 Max flow
4.0 l/h
Pump 2 Max flow
4.0 l/h
Pump 3 Max flow
4.0 l/h
pH Cycle Period
5 min
Max chlorine ppm
5.00 ppm
Set Point Cl
1.00 ppm
Proportional Band Cl
0.50 ppm
Max HP ppm
500 ppm
Set Point HP
120 ppm
Proportional Band HP
50 ppm
Contrast
25