12 TROUBLESHOOTING AquaLab
SOLUTION:
The mirror used for dew point measurements requires cleaning. Fol-
low the instructions outlined in Section 6: Cleaning and Maintenance
before trying to run your sample again. If this message continues to
appear, contact Decagon for further options.
10. PROBLEM:
Message on screen displays the error “Firmware is corrupted.”
SOLUTION:
The firmware on the instrument is corrupted and needs to be reloaded.
To download new firmware to the Series 4 models, the instrument
must be serviced by Decagon. 11. PROBLEM:
Ran test with wrong model.
SOLUTION:
78
To Next Page
Loading...
