Aqualisa SMART - Wiring Diagram - Divert Models Only; Diverter Outlet Switch Function

Wiring Diagram - Divert Models Only
Cables must be run in
conduit or trunking/sheathing
Diverter Outlet
B
OUTLET
A
OUTLET
1
SWITCH
2
See reference notes in Diverter Controller Matrix for further information.
This switch sets the default
outlet for the shower
controllers.
CONNECT ONLY TO PORT 1
indicated by single dot)
2m Patch
Cable in Port 2
(indicated by 2 dots)
10m Data Cable
10m Data Cable
Controllers
1 & 3 only.
(Refer to Diverter
controller matrix).
Controller
2 only.
(Refer to Diverter
controller matrix).
Cable Entry
Points
Port 1
Port 2