Araknis Networks AN-310-RT-4L2W User Manual

© 2018 Araknis Networks
®
-Return to Table of Contents-
10
Araknis Networks® 310 Series Router
User Interface Manual
Status > System
Release Button: Click to release the current WAN IP address back to the DHCP pool and receive a new one.
Renew Button: Click to renew the current WAN DHCP connection. The WAN IP address may or may not
change.
Note – The Release and Renew buttons control the network IP address.
Interface: Each WAN has its own table.
IP Address: WAN IP address of the connection.
Subnet Mask: WAN subnet mask.
Default Gateway: WAN gateway IP address.
DNS 1: WAN primary domain name server.
DNS 2: WAN secondary domain name server.
At the very bottom, the WAN’s current speed is displayed. The color code is as follows:
• Gray: Not connected to a device, or the connected device has not negotiated a speed.
• Orange: 10/100Mbps connection is active.
• Green: 1Gbps connection is active.
• Red: Port has been disabled by the user in the web interface settings.

Araknis Networks AN-310-RT-4L2W Specifications

General

Brand	Araknis Networks
Model	AN-310-RT-4L2W
Category	Network Router
Language	English