© 2018 Araknis Networks
®
-Return to Table of Contents-
20
Araknis Networks® 310 Series Router
User Interface Manual
Settings > WAN
Multi-WAN Section
Network Service Detection regularly checks to ensure that the network connection is active, using a ping
test and/or a Domain Resolution test. If it detects that the network is inactive, it performs the action
selected in the dropdown.
When Network Service Detection is enabled, you can opt to use any or all of the three detection methods
listed to ensure your router is connected to the internet.
Ping Default Gateway refers to the default of WAN 1 (if more than one WAN is available).
Alternatively, you can add up to ten IPs (entered as IPv4 addresses) or three URLs to check.