© 2018 Araknis Networks
®
-Return to Table of Contents-
11
Araknis Networks® 310 Series Router
User Interface Manual
Status > Clients & Services
Status > Clients & Services
This section describes the router firewall services, VPN services, attached clients, and port forwarding
settings that are currently in use. This is where you can locate devices are (via IP/DHCP reservation) and
determine which services could be aecting system performance.
Despite the appearance, this table is information only; you cannot adjust settings here. To adjust the
settings, go to Settings > Firewall.
Firewall Status
SPI (Stateful Packet Inspection): See whether the SPI firewall setting is on or o.
DoS (Denial of Service): See whether the DoS firewall setting is on or o.
Block WAN Request: See whether the Block WAN Request firewall setting is on or o.
Remote Management: See whether the Remote Management firewall setting is on or o.
VPN Tunnel Status Section
A virtual private network (VPN) provides a connection between dierent networks through a secure tunnel
over the Internet. Data sent through the VPN tunnel is encrypted for privacy even when connected to a
public or shared network that isn’t secure. VPNs are commonly used to send data between networks in
dierent geographical locations that have no dedicated physical connection.
The router can support a maximum of twenty OpenVPN, as well as twenty PPTP tunnels. Both types can
be active simultaneously.
This router features a built-in OpenVPN server for secure, easily configured access to the network (via
To Next Page
Loading...
Need help?
General
