15-02-2019 Page 37 of 44 ARB Copyright 2019 3789507
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
6.10) The completed trim in the rear vertical corners
should look like that in the picture opposite when
viewed from inside the bed liner.
6.11) Fit the bed liner to the vehicle following the bed
liner fitting instructions. The fitment of the
bedliner in the front and rear mounting bracket
areas should look like that in the pictures
opposite.
To Next Page
Loading...
