ARC Automate - Adjusting Motor Limits; Adjusting the Upper Limit; Adjusting the Lower Limit

12 | Automate
™
Programming Instructions | 15 Channel Remote
SEC
SEC
S
S
5
5
Adjust Upper Limit
Adjust Lower Limit
7.1
7.2
Hold UP AND STOP
on controller.
Hold DOWN and STOP
on controller.
Move shade to the desired
lowest position by pressing
the DOWN button.
Move shade to the desired
highest position by pressing
the UP button.
To save upper limit, hold
UP AND STOP.
To save lower limit, hold
DOWN and STOP.
Approx.
Approx.
Motor Response
Motor Response Motor Response
Motor Response
7 ADJUSTING LIMITS
SEC SECS S
5 5
Approx. Approx.
For systems using FT Motors & the Ultra Lock, the bottom limit should be set ~ 1.38 in. (35mm) below the Ultra-Lock to disengage the auto
lock mechanism when the shade is raised.
IMPORTANT
++
++