ARC Automate - Using Existing Controllers; Hiding Unused Channels

Automate
™
Programming Instructions | 15 Channel Remote | 9
Hide Unused Channels
Using pre-existing controller
5.4
5.3
Repeat steps and select 15 as desired number of channels to access all channels.
A = Existing controller or channel (to keep)
B = Controller or channel to add or remove
Select channel that operates
motor on existing remote.
Press P2
Hold CHANNEL UP and
CHANNEL DOWN for 5 seconds
Press P2 a second time on
existing remote.
Press CHANNEL UP or
CHANNEL DOWN to select
number of channels
Select desired channel on new
remote.
Press P2 on new remote.
Press STOP for 2 seconds
IMPORTANT
OR
+
Motor Response
Display Response
Motor Response Motor Response
Display Response
Your multi channel remote can be configured to have anywhere between 1 to 15 visible channels.
Inactive channels will not be visible when scrolling through the channel selection.
C
o