2 | Automate
™
Programming Instructions | 15 Channel Remote
1 TECHNICAL DATA / PACK CONTENTS 3
2 SAFETY 4
3 INSTALLATION 5
3.1 Remote battery 5
3.2 Wall mount holder 5
4 FUNCTIONAL OVERVIEW 6
4.1 Buttons 6
4.2 Leveling control 6
4.3 Selecting a channel 7
4.4 Group control using channel "0" 7
5 PROGRAMMING 8
5.1 Protocol selection 8
5.2 Using motor P1 button 8
5.3 Using pre-existing controller 9
5.4 Hide unused channels 9
6 INITIAL SET UP 10
6.1 Check motor direction 10
6.2 Set Limits 10
6.3 Locking the Limit setting function 11
7 ADJUSTING LIMITS 12
7.1 Adjust upper Limit 12
7.2 Adjust lower Limit 12
8 FAVORITE POSITIONING 13
8.1 Set a favorite position 13
8.2 Send shade to favorite position 13
8.3 Delete favorite position 13
9 TROUBLE SHOOTING 14
10 NOTES 15
CONTENTS
To Next Page
Loading...
