Automate
™
Programming Instructions | 15 Channel Remote | 7
Press CHANNEL UP to step via increments
through the channels 1 - 15
Hold CHANNEL UP to scroll continuously
through the channels 1 - 15
Press CHANNEL DOWN to step via increments
through the channels 15 - 1
Hold CHANNEL DOWN to scroll continuously
through the channels 15 - 1
Selecting a channel
Group control using channel "0"
4.3
4.4
One channel must be selected at all times.
You can cycle through 1-15 by pressing only CHANNEL UP or you use the CHANNEL DOWN button to cycle in reverse or a
combination of both.
IMPORTANT
Channel "0" is pre-set to control ALL shades paired within your multi-channel remote. To create customized
group channels, refer to section 6.
To Next Page
Loading...
