EasyManua.ls Logo

Arcam AV888 - External Amplifiers; Analogue Pre-Amplifier Outputs; XLR Balanced Line Outputs (AV888)

Arcam AV888
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E-53
English
XLR balanced line outputs –
AV888 only
e AV888 processor provides XLR connectors for each
of seven channels, to an XLR-equipped amplier (e.g.
the Arcam P777). ree XLR subwoofer outputs are
provided in addition.
RIGHT, LEFT, CENTRE
Connect these to the equivalent (Right, Le and Centre)
front channels of your power amplier.
SW1
Main subwoofer output. Connect this to the input of
your active subwoofer, if present.
SW2, SW3
Subwoofer 2 and Subwoofer 3 auxiliary outputs. ese
are equivalent to SW1 but they allow the use of multiple
subwoofers.
SR, SL
Surround Right and Surround Le outputs. Connect
these to the Surround Right and Le power amplier
inputs.
SBR, SBL
Surround Back Right and Surround Back Le outputs
(only used in 6.1 and 7.1 channel systems). Connect
these to the Surround Back Right and Surround Back
Le power amplier inputs.
For 6.1 channel speaker congurations, connect the
single Surround Back power amplier to the SBL output.
external
ampliers
Analogue pre-amplifier outputs
(AVR600/AV888 only)
All pre-amplier analogue outputs are buered, have
a low output impedance and are at line level. ey are
able to drive long cables or several inputs in parallel if
required.
R, L, C
Connect these to the equivalent
(Right, Le and Centre) front
channels of your power amplier.
SW1
Main subwoofer output. Connect
this to the input of your active
subwoofer, if present.
SW2, SW3
Subwoofer 2 and Subwoofer
3 auxiliary outputs. ese are
equivalent to SW1 but they allow
the use of multiple subwoofers.
SR, SL
Surround Right and Surround Le outputs. Connect
these to the Surround Right and Le power amplier
inputs.
SBR, SBL
Surround Back Right and Surround Back Le outputs
(only used in 6.1 and 7.1 channel systems). Connect
these to the Surround Back Right and Surround Back
Le power amplier inputs.
For 6.1 channel speaker congurations, connect the
single Surround Back power amplier to the SBL output.

























888

Other manuals for Arcam AV888

Related product manuals