EN
EN-9
Rear Panel Connections and Controls
PRE-AMPLIFIER OUTPUT
Provides the pre-amplifier output
for use in a bi-amplified system. See
“Pre-Amplifier Output” on page EN-13
PHONO GROUND CONNECTION
Connect the turntable earth lead, if
required
Note that this terminal must
not be used as a safety
earth
DIGITAL AUDIO INPUTS
Optical and coaxial digital audio
connectors. See “Digital Audio
Inputs” on page EN-12
ANALOGUE AUDIO INPUTS
Phono and line level audio inputs.
See “Analogue Audio Inputs” on
page EN-12 and “Phono Input” on
page EN-12
NETWORK
Connect this socket to a port on
your network router using an
Ethernet patch cable. See “Home
Automation Control” on page EN-14
RS232
This connection allows for remote
control from a third-party home
automation system or computer.
See “Home Automation Control” on
page EN-14
Please read the sections “Placing The Unit”, “Power” and
“Interconnect Cables” on page EN-6 before connecting
your SA30 amplifier!
POWER INLET
110-120V/220-240V ~ 50/60Hz
500W MAX
SUPPLY
VOLTAGE
SWITCH POSITIONS
115 = 110 - 120V ~
230 = 220 - 240V ~
RS232
NET
USB
5V 100mA
SAT AV
BD
R
L
CD PVR STB
PRE
OUT
4-16 OHMS
R L
DIGITAL IN
ANALOGUE IN
PHONO
(MC)
GAME
PHONO
(MM)
WiFi ANTENNA
ARC / eARC
SERVICE
WiFi ANTENNA
WiFi ANTENNA
Install WiFi antenna here if wireless
network connection is required
SPEAKER TERMINALS
See “Connecting Loudspeakers” on
page EN-10
VOLTAGE SELECT
Ensure that the voltage selected
matches the local power supply
POWER INLET
Connect the correct mains cable
here
USB Type A
This USB socket is used playback of
audio files from pen drives.
ARC/eARC
Connect ARC/eARC enabled TV
input here. See “ARC/eARC input” on
page EN-13
To Next Page
Loading...
