1
1. SAFETY
Welding may cause damage to you and others. Please take good protection during welding.
Please refer to the operator safety guidelines in conformity with the accident prevention
requirements of the manufacturer for more details.
Only qualified personnel can operate this machine!
Please use welding protection appliances approved by national
safety supervision department.
All operators must be licensed and valid special operating
personnel for metal welding & cutting jobs.
Please cut off power supply while maintaining.
Electric shock-may result in serious injury or even death!
Install grounding device according to application standard.
Do not touch live parts with naked skin, wet gloves or wet clothes.
Be sure you are insulated from ground and work piece.
Make sure all your working conditions are safe
Fume and gases can be dangerous!
Keep your head away from fumes and gases while in welding.
Please use enough ventilation or exhaust to keep fumes and
gases away from the breathing zone.
Arc rays can burn!
Use suitable shield and clothing to protect your eyes and body.
Protect other nearby personnel with suitable ,non-flammable
screening from being injured.
Improper operation may cause fire or explosion.
Welding spark may cause fire. Please make ensure there are no
inflammable in welding area, and always be alert to fire safety.
Make sure there is fire extinguisher readily available and welders
are well trained to operate the fire extinguisher.
Do not weld air-tight container.
Do not use this machine for pipe unfreezing
Weld materials can burn.
Do not touch hot work piece with bare hands.
Cool the welding torch after continuously working.
Digital Welder Expert, Know You More
https://www.arccaptain.com
To Next Page
Loading...
