NOTES: The brake fluid level must be above the MIN mark. If the level keeps going down, have an
authorized dealer check it.
Always use DOT #4 brake fluid.
4. SHIFT LEVER
L: High torque use (advance gear)
H: Normal use (driving gear)
N: Neutral
R: Reverse use
P: Parking use
Shift lever instructions:
1. Engine starts in Neutral (N) and Parking (P)
position.
2. Engage a brake and (push the knob) in and
move the shift lever from N to H, L or R.
(L shift is used for rough surfaces)
※Shifting H to L and any gear/direction the vehicle must be at a complete stand still.
3. For reverse, with the brake on, (push the knob) in and move the shift lever from N to R.
Parking instructions:
1.
At “P” position, the engine RPM is limited. Opening the throttle will damage the vehicle.
For RPM checking or adjusting, please shift the lever to “N” position.
CAUTION!
Operating the shift lever when vehicle is moving can be hazardous. This is strictly prohibited.
Always wait till the vehicle stops completely, do not operate the ATV at high speed in reverse
To Next Page