11. Pour the recommended coolant into the radiator until it is full.
Antifreeze/water mixture ratio: 1:1
Recommended antifreeze:
High quality ethylene glycol antifreeze containing corrosion inhibitors for aluminum engines
Coolant quantity:
Radiator capacity (including all routes): 2.6 L
Reservoir capacity (up to the maximum level mark): 1.1 L
12. Install the radiator cap, start the engine let it idle for several minutes and then turn it off.
13. Remove the radiator cap to check the coolant level in the radiator. If it is low, add sufficient
coolant until it reaches the top of the radiator then install the radiator cap.
14. Start the engine and then check for coolant leakage.
15. Install the front cover.
8. SPEEDOMETER
PANEL DESCRIPTIONS
To Next Page