Replacing a fuse
The main fuse box and the EPS fuse box are located under the seat.
If a fuse is blown, replace it as follows.
1.
Turn the key to “OFF” and turn off all electrical circuits.
2.
Remove the blown fuse and then install a new fuse of the specified amperage.
3.
Turn the key “ON” and turn on the electrical circuits to check if the devices operate.
4.
If the fuse immediately blows again, have an authorized dealer check the electrical system.
19. REPLACING A HEADLIGHT BULB
If a headlight bulb burns out, replace it as follows.
1. Remove the cover at the rear of the headlight by pulling it off.
2. Remove the headlight bulb holder cover by pulling it off.
Bulb Holder
Headlight Cover
WARNING!
Always use a fuse of the specified rating and never use a substitute object in place of the
proper fuse. An improper fuse or a substitute object can cause damage to the electrical
To Next Page