Place known weight on top of empty
cylinder. Known weigh should be minimum
5kg. In our example, it is 20kg.
Operator should know the right amount
(+-10gr) of the weigh he is using.
Make sure it is placed centrally on the
cylinder and platform.
Press and hold depressed the "DOWN"
button and switch ON the unit (on the main
power switch at back).
The display will indicate SPAN.
By pressing “UP” or “DOWN” buttons, set
the amount of the known weight.
When display indicates the selected
amount press “START” button to confirm
the calibration.
Take off the weight on the top of the
cylinder (without the weight machine
should indicate arr. 0.00kg).
To Next Page
Loading...
