Aritech Advisor RD 6203 - Options for Fast Format; Assign a Channel to an Event; 5 Options for Various Protocols

Programming manual for RD6203 Page 27
5. Options for various protocols
Protoc Opt
In this section the options of the various protocols are programmed. For information on the various protocols
see Appendix 1, 'Protocols.'
5.1. Options for Fast Format
Fast Format
This is used to program the options for fast format protocols. The dialler can be set for 1400/2300
Aritech protocol (8 and 16 channels) or Scancom 1600/2300 (8 and 16 channels). These protocols are
also called Scancom 1400 Superfast and Scancom 1600 Superfast.
5.1.1. Assign a channel to an event
Channels Options
When an activation occurs it is sent to Central Station on a set channel. This option allows the
engineer to select a channel for an event. The normal settings in the UK are: Fire channel 1, PA
channel 2, Burglary alarm channel 3, and Opening/closing channel 4.
If the system is configured for more than one area, there are two ways of identifying the
activated areas: by allocating each area a different account number, or by allocating different
channels to the areas in the “Channel Areas” menu. The method selected must be agreed with
Central Station prior to programming.
The â
ââ
â, á
áá
á, ü
üü
ü, X and the 0 keys are used for programming. If you program more than 8
channels, reporting is automatically via 16 channels. The following example illustrates the
programming method.
Example 2. Program option 'FA' from channel 2 to channel 3
1. The list begins with the option ‘BA’ , Burglary alarm. Find option
Option BA
FA' with â
ââ
â and á
áá
á.
123
457
789
0
á
áá
á or â
ââ
â
Option FA
2. Press the accept key ü
üü
ü to change.
123
457
789
0
ü
üü
ü
The cursor is under channel 1 which is invisible (inactive).
__2
Channel 2 is active.
3. Go to channel 2 with â
ââ
â.
123
457
789
0
â
ââ
â
2
4. Press '0' and channel 2 becomes invisible. The cursor moves to
channel 3.
123
457
789
0
0
__
5. Press '0' again and channel 3 becomes visible. Channel 3 is
reported for a fire alarm
123
457
789
0
0
3__
6. Press the accept key ü
üü
ü . The programming is active.
123
457
789
0
ü
üü
ü
Option FA