Programming manual for RD6203 Page 5
HOW TO USE THE MANUAL
This programming manual explains all the programming options available for the RD6203 modem/dialler.
Using the menu structured program, in conjunction with the programming map, any required option may be
easily and quickly selected.
All the menu items are explained in the chapter ‘Menu Contents,’ and they are also listed in the programming
map. Each menu item in the map has a quick code number associated with it. These numbers are repeated
in the section numbering of the ‘Menu Contents’ chapter to help you quickly locate information about the
menu item.
An example of the method used is shown below:
Programming map:
The quick code of menu item ‘1 event/call’ is 5.2.1.
Menu Content’s chapter:
5.2.1 Every event in a separate data block
Here you set whether 1 or several events per data block are sent to the central station. This
option must normally be set at ‘Yes’.
The organisation of this manual is based on standard programming.
At the back of the manual you will find a short explanation of the protocols, SIA extensions, contact ID codes,
transport PC, as well as an index.
1 event/call Yes
menu item’s quick code
menu description
keypad display
explanation
To Next Page
Loading...