Aritech Advisor RD 6203 - 1. Telephone Numbers and Account Numbers of Central Stations; Managing Central Station Numbers

Page 16 Programming manual for RD6203
1. Telephone numbers and account numbers of
central stations
Tel/Account Nbrs
In this section the central station telephone numbers, area account numbers, and the options for upload and
download are programmed.
The following keys are used:
Program Keys Used
Keys 0 to 9 Keys 0 to 9 will overwrite the digit at the cursor location. The cursor
automatically moves one position to the right.
Moving Cursor
Press ↑ to move the cursor left and ↓ to move the cursor to the right.
Pause between digits
↑ and ↓ pressed simultaneously, p appears. Accept with ü. When the
dialler is dialling a number a short delay will be inserted.
Wait for dial tone
↑ and ↓ pressed simultaneously, p appears. After ↓ t appears, accept
with ü.
Deleting Tel/Acc
Number
↑ and ↓ pressed simultaneously, p appears. Press 0 and accept by
pressing ü twice. This deletes from the current cursor position to the
end of the line.
Table 1. Programming telephone & account numbers
Note: With a CD9038 control panel ↑ is the * key and ↓ is the # key.
Changing or deleting a telephone number:
This section shows you how to edit the telephone number for central station 1 from an existing value.
In this example the number 091537427 to 0315366.
1. From the menu item CS1 Teleph. Nbr. 1, press ü to display the
CS1 Teleph. Nbr. 1
current phone number.
ü
091537427
2. Press ↑ to skip over 0, then 3 to change 9 to 3.
↑3
031537427
3. Then press ↑ three times to position the cursor under 7.
↑↑↑
031537427
4. Press 6 twice to change 74 to 66.
66
031536627
5. Press ↑ and ↓ simultaneously, a ‘p’ is displayed. Then press ‘0’,
the remainder of the line, i.e. ‘27’, disappears.
↑ ↓ and 0
0315366_
6. Press ü twice and the changes are completed and you are
returned to the previous menu.
üü
CS1 Teleph. Nbr. 1