Page 6 Programming manual for RD6203
Keys used:
CD3008
Move down the menu (forward)
â
Move up the menu (backward)
á
Accept programming option
ü
Reject programming option X
A few programming options require the use of the zero (0) key to toggle a digit ON or OFF a display. An
example of this use is shown on page 25 in “Report options programming.”
Version V6.0 diallers may be used with the CD range of control panels using
version V5.x or V6.0 software.
TO ENSURE CORRECT OPERATION
Regardless of the panel software version, always default the dialler before
programming.
Note: If the dialler is defaulted to version 6, version 5 panels will not be able
to default the dialler.
!
To Next Page
Loading...
General