Page 58 Programming manual for RD6203
time between test reports, 31
waiting period to the first test report, 31
Test wait time, 31
Testing the dialler, 13
Tone dialling, 21
Transport-PC, 45
BELL103 protocol, 45
calling dialler, 46
CCITT V21 protocol, 45
connecting, 45
purpose, 45
requirements, 45
starting U/D, 46
up/download communication frequency changed, 19
using dummy line, 46
—U—
U/D, 19
U/D account number, 19
U/D frequency BELL, 19
U/D frequency CCIT, 19
U/D if armed, 20
U/D init., 19
U/D Teleph. Nbr., 19
U/D telephone number, 19
Up/Download
account number, 19
activate when armed, 20
answer after number of rings, 20
contact ID code, 43
download engineer memory, 20
protocol, 19
report option, 23
settings, 19
start by ringing, 19
start via open line, 19
start via user code, 19
telephone number 1, 19
telephone number 2, 19
User code, 19
Using the manual, 5
—V—
Voice, 18
Voice kiss-off, 30
Voice/semadigit, 30
messages available, 30
—W—
Wait dial tone, 21
Waiting period between two dialling attempts
programming, 21
Walktest fail
report option, 24
Walktest pass
report option, 24
Wiring diagram RD62, 47
—X—
X SIA, 18
To Next Page
Loading...