10CS-175-275-575 Series • LED User Guide
Bypassing (excluding) open zones
In the event of a zone fault, you can bypass (exclude) open zones when turning on your system by using the bypass (exclude) key.
User Action: Press I.
User Action: Type your user code, if this requirement has been
programmed by your installer.
LED Display: Open zones are displayed by flashing LEDs.
User Action: Press the zone number(s) you would like to exclude.
User Action: Press I.
LED Display: Zone LEDs stop flashing and ready LED illuminates.
User Action: Type your user code to turn on the system.
e S
i S
e S
i S
à é à ( S
To Next Page
Loading...
