11CS-175-275-575 Series • LED User Guide
Unbypassing (including) zones
User Action: Press I.
User Action: Type your user code, if this requirement has been
programmed by your installer.
User Action: Press the zone number(s) you would like to include.
LED Display: The corresponding zone LED(s) go off indicating
the zone has been unbypassed.
LED Display: Bypassed zones are indicated by flashing LEDs.
User Action: Press I.
User Action: Type your code to turn on the system.
i S
e S
e S
à é à ( S
i S
To Next Page
Loading...
