21
NOTE: “Lo” results are included as 20 mg/dL in the averages. “Hi”
results are included as 600 mg/dL in the averages.
Setting Test Averaging
Press the Gray/Down Arrow button to cycle
through the test averaging choices: “oFF”
(not displayed), “14” (14-day average), or“30”
(30-day average).“AVE” appears near the
middle of the screen.
If you select either 14-day or 30-day averaging,
your average test result will appear when you
recall results from memory. See page 58.
After you set test averaging, press the
Orange/Up Arrow button to confirm the
setting. The display changes to the data
download baud rate set-up screen.