Arkray Glucocard 01 User Manual

22
Ending Set-up
To make further changes to set-up settings, press
the Gray/Down Arrow button while “End” is
displayed. This will bring up the Audible Beep
set-up screen. You can then move through the
set-up mode and adjust any settings that you wish.
If you are done with set-up, press the Orange/Up
Arrow button while “End” is displayed. This
confirms all settings and turns the meter off.
The meter will turn off automatically 3 minutes after “End” is displayed.
<Power OFF>
Beep

Arkray Glucocard 01 Specifications

General

Brand	Arkray
Model	Glucocard 01
Category	Blood Glucose Meter
Language	English