26
Step 1: Insert a test strip as shown in diagram. Test strip should
seat firmly into meter. The meter will turn on automatically. The full
screen will come on for a moment. Make sure all symbols appear on
the screen (see page 8). Then the code number (F-2, F-3, or F-4) will
appear and will alternate with the Apply Blood symbol. Make sure that
the code number on the screen matches the code number on the
test strip bottle. If screen code does not match the test strip code, use
a new test strip. If code still does not match, use a new bottle of test
strips or call Customer Service at 800.566.8558 (24 hours a day, 7 days a
week, USA and Canada only).
To Next Page
Loading...
Need help?
General
