Arkray Glucocard 01 - Step 2: Scrolling Through Stored Results

59
•IfTestAveraginghasbeenturnedon,the
average result will appear first. Either “14d”
or “30d” will show at the bottom of the screen
for either a 14-day or 30-day average. “AVE”
will appear above “14d” or “30d”.
•IfTestAveraginghasbeensetto“Off”,the
display will briefly flash the number “1” at the
bottom of the screen. Then, the most recent
test result appears with the date and time of
the test.
“MEM” will display at the top of the screen.
This shows it is a stored result.
Step 2: Press the Orange/Up Arrow button
to scroll through memory. Press and hold the
Orange/Up Arrow button to move through
the results quickly. Press the Gray/Down
Arrow button to move backwards through
results in memory.
[1]
[2]
[3]
mg/dL
mg/dL
mg/dL
mg/dL
mg/dL