68
Apply Control Solution. The Apply Blood symbol flashes
alternately with the strip code number (F-2, F-3, or F-4)
and “CONT” appears at the bottom of the screen.
This shows the meter is ready for you to apply control
solution.
Test Result. The meter shows results between 20
and 600 mg/dL.
Test Average has no results stored. Test Averaging has
been set to 14-day or 30-day but there are no results
stored yet in memory.
For errors not listed, do not attempt to use meter.
Contact Customer Service at 800.566.8558.
To Next Page
Loading...
Need help?
General
