Arlo Pro 2 - Page 65

Settings
65
¾ To change the base station name:
1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices including the base station and cameras displays.
3. Tap or click the base station.
The base station settings page displays.
4. Tap or click Name.
5. Enter a new name for the base station.
The new name is displayed in the Arlo app.
Adjust the Base Station Flicker Setting
The combination of certain artificial light sources and the camera shutter speed
might result in flickering in recorded video. The default setting for the base station
is Auto, but you can change the flicker adjustment.
¾ To select the base station flicker adjustment:
1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices including the base station and cameras displays.
3. Tap or click the base station.
The base station settings page displays.
4. Tap or click Flicker Adjustment.