Need help?Do you have a question about the ARM Pool Alarm and is the answer not in the manual?
General| Type | Pool Alarm |
|---|---|
| Alarm Type | Audible Alarm |
| Power Source | Battery |
| Weather Resistance | Yes |
| Installation | Wall-mounted or Floating |
Displays normal operation status and keyswitch modes for the Pool Alarm system.
Explains Day and Night settings influencing system response and sounder behavior.
Details how call/alarm signals are displayed, including rotation and pager notifications.
Explains how sounders differentiate between call types like Assistance and Emergency.
Describes the function of the Silence button for muting sounders and its auto-resound behavior.
Explains how to request assistance or an emergency by pressing specific buttons.
Details how to reset a triggered call point using the green reset button.
Provides instructions for replacing the battery in Help Call units.
Explains how to activate an emergency alarm by pulling the red switch.
Details how to reset the Emergency Alarm unit by pushing the pull switch back.
Provides instructions for replacing the battery in Emergency Alarm units.
Allows individual sensors to be taken offline from system operation for maintenance.
Guides users on how to modify the system's time settings via the User Menu.
Guides users on how to modify the system's date settings via the User Menu.
Allows viewing battery voltage and signal strength for each sensor.
Enables viewing and printing of past system events.
Instructions for renaming sensors for better identification within the system.
Describes renaming Patient Keyfobs with personalized names.
Details the procedure for personalizing Staff Keyfobs with staff names.
To Next Page