EasyManua.ls Logo

ARM Pool Alarm - 7. Service & Maintenance

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
All Units on the system will periodically transmit their status to the Control Panel, enabling the system to monitor
the functionality of all units on the system.
The Control Panel will also monitor the battery levels of all the units incorporated into the system and notify you
of any Low Battery faults when they arise, giving you 30 days notice before the battery becomes too low.
If a fault or low battery is detected the Display will show the Sensor number and its location along with the
fault.
For information about replacing the batteries in the various units please see Battery Replacement at the end
of the relevant sections.
For faults firstly refer to the Trouble Shooting section, if the fault persists then contact your Installer/Supplier.
Do not remove any of the Call Points/Units from the site as this will cause the control panel to raise a warning
that a unit is missing (RF Fault will be displayed)
We recommend that you have your system serviced once a year and at least once every three years to
replace all system batteries.
7. Service & Maintenance