16. Dismantling the Cabinet
Conforming with the regulations for proper disposal and for the respect of the environment we
live in, we invite you to divide the parts of the case in order to facilitate easy disposal
separately through your local recycle program.
Materials used in the construction of the case:
ΠPainted steel: Vertical supports, decks, feet
ΠCopper, Aluminum: Refrigerating circuit, electrical system and lighting.
ΠGalvanized sheet: Lower panels, painted panels, base structure, shelves.
ΠPolyurethane (R134a): Thermal foam insulation
ΠTempered glass: Glass sides, front
ΠPVC: Bumpers and handrail
ΠPolycarbonate: Fluorescent bulb protection
THE COMPONENTS OF THE REFRIGERATION CIRCUIT MUST NOT BE CUT AND/OR
SEPARATED BUT MUST BE TAKEN IN ONE PIECE TO SPECIALIZED CENTERS FOR THE
RECOVERY OF REFRIGERATING GAS
17. Useful Advice
Users are advised to read the Instruction and Users Manual carefully so that the operator, in
case of a problem, will be able to give more precise information to Technical Assistance.
Before carrying out any maintenance operation on a refrigerated case, ensure that the power
supply has been disconnected. If the client notices an anomaly in the functioning of the case,
before contacting Technical Assistance, it is essential that the following points are verified:
• Verify that the values of the temperature and humidity in the store environment
are not exceeding 75 F and 55% relative humidity.
• For this reason it is essential to maintain the air-conditioning, ventilation and
heating systems working at the proper levels in the store 24 hours every day.
• Limit the speed of the air near the openings of the cabinets, in particular it is
necessary to avoid currents of air from delivery openings of the air-conditioning
system being directed towards the case openings.
• Avoid solar radiation directly touching the displayed stock.
• Do not use spotlights with incandescent bulbs directly pointing onto the case.
• Make sure the air return and supply openings of the case are never obstructed
(not even partially) with stock, labels, accessories or anything else.
• Only place stock into the case which is already cooled to the temperature which
normally characterizes the cold chain. Verify that the cabinet is always able to
maintain that temperature.
12
Arneg USA - Lexington, NC
BILBAO & SUPER BILBAO
BILBAO & SUPER BILBAO
To Next Page
Loading...
