§
i
k^
is!
*
cOfttrol atteniiator down atid try various setting; of ths
four ADSR controls.
By closing the VCF Freq slidir and opening the third
attenuator
under
the VCF
all the
way as
ia Figure U,
you can give yourself a similair introduction to ADSR and
AR
control
of
the VCF.
Experinient too with various
conibinations of the VCF freq and control attenuator
settings,
and
with various
mixes {by
means
of
the
input
attenuaEOFS to the audio mixer) of signats from VCO 1
and VCO 2.
Up
to
now you have been triggering the envelope
generator^ Only from
thekeybogitl.
By
means of the three
switches at the bottom right of Figure V^ you car also
trigger the envelope generators with the LFO, Move all
three switches
dowrn
and set the other controls of
your
ODYSSEY for AR or ADSR control of the VCF or VCA
as in Figure V. Wow try different settings of the LFO
freq
slider from low to high. With the first switcih dov^m and
the second switch up, a series of events will be produced
(triggered) by the
LFO, but
onty when a key
is
depressed,
This Ls useful in simulating banjo-picking and
strumming.
To Next Page
Loading...
