18 Motor layout
5.3 Status LEDs
The status LED of the upper button indicates the current motor status:
LED (Upper button) Status
Solid green Motor is ready and calibrated, no
warnings
Green flashing Motor is in passive mode
Green/red flashing No motor master available (idle)
Yellow flashing Motor is currently calibrating
Green/yellow flashing Motor needs to be calibrated (calibra-
tion request)
Solid yellow Motor is in calibration timeout state
Solid red Motor power supply is below 10V
The status LED of the lower button indicates the current radio status:
LED (Lower button) Status
Solid green Radio ready, client logged on
Yellow/red flashing Selected channel used by another
master device
Solid red Motor initializing / hardware fault
Red flashing Update
To Next Page
Loading...
